Pay in installments of $6.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Nov 16 - Nov 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
anthurium 中文 圓葉花燭｜Anthurium Clarinervium – Jungle CornerAnthurium clarinerviumAraceae 1. 2. 20C30C16C 3. 4. 5. 6. 7. 8. : 25 30cm : 25 30cm : : : 20C 30C
產品介紹
圓葉花燭（Anthurium clarinervium）是一種熱帶多年生常綠植物，屬於天南星科（Araceae）的一員。它是一種熱帶雨林植物，原產於墨西哥，以其獨特的心形葉片和吸引人的外觀而受到園藝愛好者的喜愛。
以下是養護圓葉花燭的一些要點：
1. 光照：圓葉花燭喜歡明亮但不直射的光線。適宜放置在室內明亮的位置，避免暴露在強烈陽光下，以免葉片受傷。
2. 溫度：適應於溫暖的環境，理想的生長溫度範圍為20°C至30°C。避免將植物放置在低於16°C的低溫環境中。
3. 水分：保持土壤濕潤但不過度澆水。在每次澆水之間，讓土壤表面稍微乾燥，然後再次澆水。過度澆水可能會導致根部腐爛。
4. 濕度：圓葉花燭喜歡高濕度環境。可以在植物周圍放置一個水盤或使用噴霧瓶定期噴灑植物的葉面，增加周圍的濕度。
5. 肥料：在生長季節（春季和夏季），每個月施用一次平衡型的液體肥料。遵循產品說明上的建議用量，避免過度施肥，以免損害植物。
6. 土壤：適合圓葉花燭生長的土壤應該是輕質、排水良好且富含有機物質的混合土壤。可以使用含有珍珠岩或腐葉土的通風良好的土壤混合物。
7. 空氣流通：確保周圍空氣的流通，但避免將植物置於強風處。這有助於防止病害和促進植物的健康生長。
8. 葉片護理：圓葉花燭的葉片上有一層蠟質覆蓋物，應該避免直接觸摸或擦拭葉片，以免損壞這層覆蓋物。可以使用軟毛刷輕輕刷去灰塵或污垢。
產品規格
高度: 25-30cm
闊度: 25-30cm
光照: ◆ ◆ ◆ ◇
水份: ◆ ◆ ◆ ◇
溫度: 20°C-30°C
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Works For Desired Use
Color: Black, Size: 4 Panel-136‘’W-Round Pad
I recently purchased the Room Divider 6FT Folding Privacy Screens, 4 Panel Partition Room Dividers, and I must say, it has transformed the way I use my living space. The four-panel design is both elegant and functional, providing instant privacy without feeling bulky or overwhelming in my room.
Setting it up was a breeze; the folding mechanism is smooth, allowing me to adjust the configuration as needed—straight, angled, or zigzag. I particularly appreciate the sturdy build; the panels feel solid yet lightweight, making it easy to move around when I want to reconfigure my space.
Aesthetically, it’s a great addition. The neutral finish blends well with my décor, and the simple design doesn’t draw too much attention while still offering a sense of separation. It’s perfect for creating a temporary office corner, dividing a studio apartment, or even using it as a backdrop for online meetings.
If I had to point out a minor downside, it would be that the divider isn’t completely soundproof—so conversations can still carry through—but for visual privacy and space management, it’s excellent. Overall, I’m extremely satisfied and would recommend it to anyone looking for a versatile and stylish room divider.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026